ATH-Heinl Pure Lift 2.40 Bedienungsanleitung Seite 73

Compressed air system
Minimum requirement:
PROMAT chemicals special compressed air oil
Cleaning
Minimum requirement:
Caramba intensive brake cleaner acetone-free
Care and protection of metals, painted or powder-coated surfaces
Minimum requirement:
Petec spray translucent - 500 ml
Petec wall inlet translucent - 1000 ml
Petec UBS pistol
Care and protection of metals, painted or powder-coated surfaces in the tread area and plastic
parts
Minimum requirement:
Valet Pro Classic Protectant Plastic Sealant 500 ml
4.2 Safety Regulations for Oil
Always observe the legal requirements or regulations for handling used oil.
Always dispose of used oil through a certified organisation.
In the case of leaks, oil must be collected immediately with binders or trays so that it cannot penetrate into
the soil.
Avoid any skin contact with the oil.
Do not allow oil vapours to escape into the atmosphere.
Oil is a combustible medium. Pay attention to possible hazards.
Wear oil-resistant protective clothing, such as gloves, goggles, protective clothing, etc.
4.3 Notes
Regardless of the level of dirt, the machine must be maintained, cleaned and serviced at
regular intervals.
The machine should then be treated with a care product (such as oil or wax spray).
Do not use cleaning agents that are harmful to the skin.
IF THE ABOVEMENTIONED POINTS ARE NOT FULFILLED, THE WARRANTY CLAIM IS
EXCLUDED
® Urheberrecht ATH-Heinl GmbH & CO.KG, Alle Rechte vorbehalten / Druckfehler und technische Änderungen vorbehalten / Stand: 2021-08
Item No.: 4000355209
Item No. 73550
Item No. 73510
Item No. 98507
Produkthersteller ATH-Heinl GmbH & CO.KG
- 24 -