7�2�3 Setting The Range By Means Of Background; 7�2�4 Setting The Maximum Range - autosen AL005 Bedienungsanleitung

All manuals and user guides at all-guides.com
7.2.3 Setting the range by means of background
If the object is not available, the range can be set using only the background�
The switching characteristics of the diffuse reflection sensor are the most
reliable if the range is set using the background and the object (→ 7.2.2).
► Start the LR DEVICE software�
► Align the diffuse reflection sensor to the background (Fig� 4)�
► Press button [Teach Custom - SP1 without target] in the LR DEVICE software�
> The switch point SP1 is just in front of the background (Fig� 5)�
Fig� 4:
7.2.4 Setting the maximum range
► Start the LR DEVICE software�
► Align the diffuse reflection sensor to an empty area without object or backg-
round�
> The diffuse reflection sensor must not receive any light from the object or the
background�
► Press button [Teach Custom - SP1 without target] in the LR DEVICE software�
Fig� 5:
Zone "object recognised"
UK
SP1
27