Herunterladen Diese Seite drucken

autosen AL005 Bedienungsanleitung

Reflexlichttaster mit hintergrundausblendung

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

All manuals and user guides at all-guides.com
Bedienungsanleitung
DE
Reflexlichttaster mit
Hintergrundausblendung
UK
Operating instructions
FR
Diffuse reflection sensor with
background suppression
IT
Notice d'utilisation
Système réflexion directe avec
suppression de l'arrière-plan
Istruzioni per l'uso
Fotocellula a riflessione diretta con
soppressione dello sfondo
AL005
autosen

Werbung

loading

Inhaltszusammenfassung für autosen AL005

  • Seite 1 All manuals and user guides at all-guides.com Bedienungsanleitung Reflexlichttaster mit Hintergrundausblendung Operating instructions Diffuse reflection sensor with background suppression Notice d‘utilisation Système réflexion directe avec suppression de l‘arrière-plan Istruzioni per l'uso Fotocellula a riflessione diretta con soppressione dello sfondo AL005 autosen...
  • Seite 2: Inhaltsverzeichnis

    7�2�1 Einstellbare Parameter �����������������������������������������������������������������������10 7�2�2 Tastweite mit Hintergrund und Objekt einstellen ��������������������������������12 7�2�3 Tastweite mit Hintergrund einstellen ���������������������������������������������������13 7�2�4 Maximale Tastweite einstellen ������������������������������������������������������������13 8 Betrieb ���������������������������������������������������������������������������������������������������������������14 9 Wartung, Instandsetzung, Entsorgung ��������������������������������������������������������������14 1 Vorbemerkung Technische Daten, Zulassungen, Zubehör und weitere Informationen unter www�autosen�com�...
  • Seite 3: 1�1 Verwendete Symbole

    All manuals and user guides at all-guides.com 1.1 Verwendete Symbole ► Handlungsanweisung > Reaktion, Ergebnis […] Bezeichnung von Tasten, Schaltflächen oder Anzeigen → Querverweis Information Ergänzender Hinweis� DE DE Wichtiger Hinweis Fehlfunktionen oder Störungen sind bei Nichtbeachtung möglich� 2 Sicherheitshinweise •...
  • Seite 4: Bestimmungsgemäße Verwendung

    All manuals and user guides at all-guides.com Position des Produktlabels Hinweisschild 3 Bestimmungsgemäße Verwendung Der Reflexlichttaster erfasst berührungslos Gegenstände und Materialien und meldet sie durch ein Schaltsignal� 4 Montage ► Den Reflexlichttaster auf das zu erfassende Objekt ausrichten (Abb� 1)� >...
  • Seite 5: Bedien- Und Anzeigeelemente

    All manuals and user guides at all-guides.com Hinweis Abb� 2 Die zu erfassenden Objekte sollten sich quer zur Geräteoptik bewegen� ► Bei anderen Bewegungsrichtun- gen vorher testen, ob eine sichere Schaltfunktion gewährleistet ist� Objekt glänzend Abb� 3 ► Im Fall von glänzenden Objekt- oberflächen und weniger glänzen- den Hintergrundoberflächen sollten Sie den Sensor in einem Winkel...
  • Seite 6: 5�1 Stabilitätsanzeige

    All manuals and user guides at all-guides.com 5.1 Stabilitätsanzeige Die grüne LED leuchtet bei anliegender Versorgungsspannung und stabilem Sensorsignal� stabiles Signal Schaltpunkt stabiles Signal Hellschaltung LED grün LED gelb Dunkelschaltung LED grün LED gelb...
  • Seite 7: Elektrischer Anschluss

    All manuals and user guides at all-guides.com 6 Elektrischer Anschluss Das Gerät darf nur von einer Elektrofachkraft installiert werden� ► Befolgen Sie die nationalen und internationalen Vorschriften zur Errich- tung elektrotechnischer Anlagen� ► Spannungsversorgung nach EN 50178 sicherstellen� ► Anlage spannungsfrei schalten� ►...
  • Seite 8: Einstellungen

    All manuals and user guides at all-guides.com 7 Einstellungen 7.1 Einstellung am Gerät 7.1.1 Gerät soll schalten, wenn das Objekt erkannt wird ► Objekt platzieren� Abb� 1 ► [OUT ON] > 2 s drücken� > Die gelbe LED blinkt� > Die Einstellung der Tastweite mit Objekt erfolgt durch Loslassen von [OUT ON]�...
  • Seite 9: 7�1�4 Programmierung Fehlgeschlagen

    All manuals and user guides at all-guides.com 7.1.4 Programmierung fehlgeschlagen > Die LED blinkt schnell, 8 Hz� • Messwertdifferenz ist zu gering • Max� Programmierzeit (15 min) überschritten� 7.1.5 Elektronisches Schloss Tasten ver- oder entriegeln ► [OUT ON] und [OUT OFF] 10 s gleichzeitig drücken� >...
  • Seite 10: 7�2 Einstellung Über Io-Link

    Die zur Konfiguration des Gerätes notwendigen IODDs, detaillierte Informationen über Prozessdatenaufbau, Diagnoseinformationen und Parameteradressen sowie alle notwendigen Informationen zur benötigten IO-Link-Hardware und Software finden Sie unter www�autosen�com� 7.2.1 Einstellbare Parameter Über IO-Link können u�a� die folgenden Parameter eingestellt werden� Eine Tabelle mit allen einstellbaren Parametern finden Sie unter www�autosen�com...
  • Seite 11 All manuals and user guides at all-guides.com Parameter- Werte Beschreibung Standardeinstel- name lung Teach Custom Teach nur auf den Hintergrund, der N� A� SP1 without Schaltpunkt wird nahe vor dem Hin- target tergrund definiert� Wählen Sie diese Einstellung als Alternative zu Teach SP1, falls kein Objekt verfügbar ist�...
  • Seite 12: 7�2�2 Tastweite Mit Hintergrund Und Objekt Einstellen

    All manuals and user guides at all-guides.com 7.2.2 Tastweite mit Hintergrund und Objekt einstellen ► Software LR DEVICE starten� ► Reflexlichttaster auf Objekt richten (Abb� 1)� ► Taste [Teach SP1 TP1] in Software LR DEVICE drücken� ► Reflexlichttaster auf Hintergrund richten (Abb� 2)� ►...
  • Seite 13: 7�2�3 Tastweite Mit Hintergrund Einstellen

    All manuals and user guides at all-guides.com 7.2.3 Tastweite mit Hintergrund einstellen Wenn das Objekt nicht verfügbar ist, kann die Tastweite nur mit dem Hintergrund eingestellt werden� Das Schaltverhalten des Reflexlichttasters ist am zuverlässigsten, wenn die Tastweite mit dem Hintergrund und Objekt eingestellt wurde (→ 7.2.2). ►...
  • Seite 14: Betrieb

    All manuals and user guides at all-guides.com 8 Betrieb ► Prüfen, ob das Gerät sicher funktioniert� > Die grüne LED leuchtet bei Betriebsbereitschaft� > Einstellung Dunkelschaltung: Der Ausgang ist durchgeschaltet / die gelbe LED leuchtet, wenn kein Objekt erkannt wird� >...
  • Seite 15 All manuals and user guides at all-guides.com...
  • Seite 16 All manuals and user guides at all-guides.com Contents 1 Preliminary note �������������������������������������������������������������������������������������������������17 1�1 Symbols used ����������������������������������������������������������������������������������������������17 2 Safety instructions ���������������������������������������������������������������������������������������������17 3 Functions and features ��������������������������������������������������������������������������������������18 4 Installation����������������������������������������������������������������������������������������������������������18 5 Operating and display elements ������������������������������������������������������������������������19 5�1 Stability indication ����������������������������������������������������������������������������������������20 6 Electrical connection ������������������������������������������������������������������������������������������21 6�1 PNP �������������������������������������������������������������������������������������������������������������21 7 Settings ��������������������������������������������������������������������������������������������������������������22 7�1 Settings on the sensor ���������������������������������������������������������������������������������22...
  • Seite 17: Preliminary Note

    All manuals and user guides at all-guides.com 1 Preliminary note Technical data, approvals, accessories and further information at www�autosen�com� 1.1 Symbols used ► Instruction > Reaction, result […] Designation of pushbuttons, buttons or indications → Cross-reference Information Supplementary note� Important note Non-compliance can result in malfunctions or interference�...
  • Seite 18: Functions And Features

    All manuals and user guides at all-guides.com Visible laser light; CLASS 1 LASER PRODUCT� EN/IEC 60825-1 : 2007 and EN/IEC 60825-1 : 2014 Complies with 21 CFR 1040�10 except for deviations pursuant to Laser Notice No� 50, dated June 2007� Position of the product label Additional label 3 Functions and features...
  • Seite 19: Operating And Display Elements

    All manuals and user guides at all-guides.com Note Fig� 2 The objects to be detected are to move transversely to the lens of the sensor� ► In case of other directions of movement it should be tested before whether safe switching is guaranteed�...
  • Seite 20: 5�1 Stability Indication

    All manuals and user guides at all-guides.com 5.1 Stability indication The green LED is lit when the supply voltage is applied and the sensor signal is stable� stable signal switch point stable signal Light-on mode LED green LED yellow Dark-on mode LED green LED yellow...
  • Seite 21: Electrical Connection

    All manuals and user guides at all-guides.com 6 Electrical connection The unit must be connected by a qualified electrician� ► The national and international regulations for the installation of electri- cal equipment must be adhered to� ► Ensure voltage supply to EN 50178� ►...
  • Seite 22: Settings

    All manuals and user guides at all-guides.com 7 Settings 7.1 Settings on the sensor 7.1.1 The sensor is to switch when the object is detected ► Position the object� Fig� 1 ► Press [OUT ON] for > 2 s� > The yellow LED flashes� >...
  • Seite 23: 7�1�4 Programming Unsuccessful

    All manuals and user guides at all-guides.com 7.1.4 Programming unsuccessful > The LED flashes quickly, 8 Hz� • Measured value difference too small • Max� programming time (15 min�) exceeded� 7.1.5 Electronic lock Lock or unlock the buttons ► Press [OUT ON] and [OUT ] simultaneously for 10 s�...
  • Seite 24: 7�2 Setting Via Io-Link

    IO-Link hardware and software can be found at www�autosen�com� 7.2.1 Adjustable parameters Among others, the following parameters can be set via IO-Link� A table of all adjustable parameters can be found at www�autosen�com� Parameter name Values Description Default setting SSC1 Param�...
  • Seite 25 All manuals and user guides at all-guides.com Parameter name Values Description Default setting TI Result�State - Idle Teach-in state, after a successful teach N� A� - SP1 the value 'SP1 success' will be indicated� Success - Wait for command - Busy - Error - Custom Sequence...
  • Seite 26: 7�2�2 Setting The Range By Means Of Background And Object

    All manuals and user guides at all-guides.com 7.2.2 Setting the range by means of background and object ► Start the LR DEVICE software� ► Align the diffuse reflection sensor to the object (Fig� 1)� ► Press button [Teach SP1 TP1] in the LR DEVICE software� ►...
  • Seite 27: 7�2�3 Setting The Range By Means Of Background

    All manuals and user guides at all-guides.com 7.2.3 Setting the range by means of background If the object is not available, the range can be set using only the background� The switching characteristics of the diffuse reflection sensor are the most reliable if the range is set using the background and the object (→...
  • Seite 28: Operation

    All manuals and user guides at all-guides.com 8 Operation ► Check whether the unit operates correctly� > The green LED is lit when the sensor is ready for operation� > Dark-on mode: the output is switched / the yellow LED is lit when no object is detected�...
  • Seite 29 All manuals and user guides at all-guides.com...
  • Seite 30 7�2�3 Réglage de la portée via l’arrière-plan ������������������������������������������������41 7�2�4 Réglage de la portée maximale ����������������������������������������������������������41 8 Fonctionnement �������������������������������������������������������������������������������������������������42 9 Maintenance, réparation, élimination �����������������������������������������������������������������42 1 Remarque préliminaire Données techniques, homologations, accessoires et informations supplémentaires sur www�autosen�com� 1.1 Symboles utilisés ► Action à faire...
  • Seite 31: Remarque Préliminaire

    All manuals and user guides at all-guides.com > Retour d'information, résultat […] Désignation d'une touche, d'un bouton ou d'un affichage → Référence Information Remarque supplémentaire� Remarque importante Le non-respect peut aboutir à des dysfonctionnements ou perturbations� 2 Consignes de sécurité •...
  • Seite 32: Fonctionnement Et Caractéristiques

    All manuals and user guides at all-guides.com Position de l‘étiquette du produit Etiquette supplémentaire 3 Fonctionnement et caractéristiques Le détecteur réflexion directe détecte des objets et matières sans contact et indique leur présence par un signal de commutation� 4 Montage ►...
  • Seite 33: Eléments De Service Et D'indication

    All manuals and user guides at all-guides.com Remarque Fig� 2 Le mouvement des objets à détecter doit être transversal par rapport à la lentille de l‘appareil� ► En cas d‘autres directions de mouvement, un test de vérification préalable de bon fonctionnement doit être fait dans les conditions de l‘application�...
  • Seite 34: 5�1 Affichage De Stabilité

    All manuals and user guides at all-guides.com 5.1 Affichage de stabilité La LED verte s’allume en cas de tension d’alimentation fournie et signal stable du détecteur� seuil de signal stable signal stable commutation éclairement LED verte allumée éteinte éteinte allumée LED jaune allumée allumée...
  • Seite 35: Raccordement Électrique

    All manuals and user guides at all-guides.com 6 Raccordement électrique L'appareil doit être monté par un électricien qualifié� ► Les règlements nationaux et internationaux relatifs à l'installation de matériel électrique doivent être respectés� ► Assurer une alimentation en tension selon EN 50178� ►...
  • Seite 36: Réglage

    All manuals and user guides at all-guides.com 7 Réglage 7.1 Réglage sur l‘appareil 7.1.1 L‘appareil doit commuter lorsque l‘objet est détecté ► Positionner l’objet� Fig� 1 ► Appuyer sur [OUT ON] pendant > 2 s� > La LED jaune clignote� >...
  • Seite 37: 7�1�4 Programmation Non Réussie

    IO-Link sont disponibles sur www�autosen�com� 7.2.1 Paramètres réglables Entre autres, les paramètres suivants peuvent être réglés via IO-Link�...
  • Seite 38 All manuals and user guides at all-guides.com Nom du Valeurs Description Réglage par paramètre défaut Teach SP1 TP1 Séquence d’apprentissage pour le N� A� réglage du seuil de commutation SP1� Première partie (TP1) : apprentissage sur l’objet� Les deux parties de la séquence d’apprentissage pour TP1 et TP2 doivent être effectuées pour situer le seuil de com- mutation SP1 entre l’objet et l’arrière-plan...
  • Seite 39 All manuals and user guides at all-guides.com Nom du Valeurs Description Réglage par paramètre défaut Transmitter - On Configuration lumière émise activée/ configuration - Off désactivée Number of 0 ��� 65535 Nombre d'opérations de démarrage (pow- N� A� power cycles er-up) du capteur Operating 0 ���...
  • Seite 40: 7�2�2 Réglage De La Portée Via L'arrière-Plan Et L'objet

    All manuals and user guides at all-guides.com 7.2.2 Réglage de la portée via l‘arrière-plan et l‘objet ► Démarrer le logiciel LR DEVICE� ► Orienter le détecteur réflexion directe vers l’objet (Fig� 1)� ► Appuyer sur le bouton [Teach SP1 TP1] dans le logiciel LR DEVICE� ►...
  • Seite 41: 7�2�4 Réglage De La Portée Maximale

    All manuals and user guides at all-guides.com 7.2.3 Réglage de la portée via l’arrière-plan Si l’objet n’est pas disponible, la portée peut être réglée seulement via l’arriè- re-plan� Le comportement de commutation du détecteur réflexion directe est le plus fiable si la portée a été réglée via l’arrière-plan et l’objet (→ 7.2.2). ►...
  • Seite 42: Fonctionnement

    All manuals and user guides at all-guides.com 8 Fonctionnement ► Vérifier le bon fonctionnement de l‘appareil� > La LED verte est allumée si l‘appareil est opérationnel� > Commutation obscurcissement : la sortie est commutée / la LED jaune est allumée lorsque aucun objet n‘est détecté� >...
  • Seite 43 All manuals and user guides at all-guides.com...
  • Seite 44 All manuals and user guides at all-guides.com Inhalt Premessa ���������������������������������������������������������������������������������������������������45 1�1 Simboli utilizzati ���������������������������������������������������������������������������������������45 Indicazioni di sicurezza �����������������������������������������������������������������������������������45 Uso conforme �������������������������������������������������������������������������������������������������46 Montaggio ���������������������������������������������������������������������������������������������������46 Elementi di comando e di indicazione ������������������������������������������������������������47 5�1 Indicazione di stabilità������������������������������������������������������������������������������48 Collegamento elettrico ������������������������������������������������������������������������������������49 Impostazioni ���������������������������������������������������������������������������������������������������49 7�1 Impostazione sul dispositivo ��������������������������������������������������������������������50 7�1�1 Il dispositivo deve commutare quando viene rilevato l'oggetto ���������50 7�1�2 Il dispositivo non deve commutare quando viene rilevato l'oggetto ��50...
  • Seite 45: Premessa

    All manuals and user guides at all-guides.com 1 Premessa 1.1 Simboli utilizzati ► Istruzioni operative > Reazione, risultato […] Denominazione di tasti, pulsanti o indicazioni → Riferimento incrociato Informazioni Nota aggiuntiva� Avviso importante Rischio di malfunzionamenti o anomalie in caso di mancata osservanza� 2 Indicazioni di sicurezza •...
  • Seite 46: Uso Conforme

    All manuals and user guides at all-guides.com Targhetta 3 Uso conforme La fotocellula a riflessione diretta rileva senza contatto oggetti e materiali, segnalandoli attraverso un segnale di commutazione� 4 Montaggio ► Allineare la fotocellula a riflessione diretta rispetto all'oggetto da rilevare (fig� 1)� >...
  • Seite 47: Elementi Di Comando E Di Indicazione

    All manuals and user guides at all-guides.com Nota Abb� 2 Il movimento degli oggetti da rilevare dovrebbe essere trasversale rispetto all'ottica del dispositivo� ► In caso di direzioni di movimento diverse, testare prima se ciò garan- tisce una funzione di commutazio- ne sicura�...
  • Seite 48: Indicazione Di Stabilità

    All manuals and user guides at all-guides.com 5.1 Indicazione di stabilità Il LED verde si accende quando è presente la tensione d'alimentazione e il segnale del sensore è stabile� Punto di com- Segnale stabile Segnale stabile mutazione Hellschaltung LED verde LED giallo Commutazione impulso buio LED verde...
  • Seite 49: Collegamento Elettrico

    All manuals and user guides at all-guides.com 6 Collegamento elettrico Il dispositivo può essere installato esclusivamente da personale elettrotecnico specializzato� ► Attenersi alle norme nazionali e internazionali per l'installazione di attrezzature elettrotecniche� ► Assicurare l'alimentazione di tensione come da norma EN 50178 ►...
  • Seite 50: 7�1 Impostazione Sul Dispositivo

    All manuals and user guides at all-guides.com ► Rimuovere l'oggetto. Fig� 2 ► Premere [OUT OFF]. > L'impostazione della portata senza oggetto avviene rilasciando [OUT OFF]� > Il LED giallo si spegne� La programmazione è conclusa� 7.1.2 Il dispositivo non deve commutare quando viene rilevato l'ogge ►...
  • Seite 51: Impostazione Tramite Io-Link

    IO-Link richiesti sono disponibili sul sito www�autosen�com� 7.2.1 Parametri impostabili Tramite IO-Link è possibile tra le altre cose impostare i seguenti parametri�...
  • Seite 52 All manuals and user guides at all-guides.com Nome parametro Valori Descrizione Impostazione standard Teach SP1 TP1 Sequenza teach per impostare N� A� il punto di commutazione SP1� Seconda parte (TP2): Teach sullo sfondo� Devono essere eseguite entrambe le parti della sequenza teach per TP1 e TP2 (TP = punto Teach)�...
  • Seite 53: 7�2�2 Impostazione Della Portata Con Sfondo E Oggetto

    All manuals and user guides at all-guides.com 7.2.2 Impostazione della portata con sfondo e oggetto ► Avviare il software� ► Allineare la fotocellula a riflessione diretta rispetto all'oggetto (fig� 1)� ► Premere il tasto [Teach SP1 TP1] del software� ► Allineare la fotocellula a riflessione diretta rispetto allo sfondo (fig� 2)� ►...
  • Seite 54: 7�2�3 Impostazione Della Portata Con Sfondo

    All manuals and user guides at all-guides.com 7.2.3 Impostazione della portata con sfondo Se l'oggetto non è disponibile, la portata può essere impostata solo con lo sfondo� La commutazione della fotocellula a riflessione diretta è più affidabile se la portata viene impostata sia con lo sfondo, che con l'oggetto (→ 7.2.2) ►...
  • Seite 55: Funzionamento

    All manuals and user guides at all-guides.com 8 Funzionamento ► Controllare che il dispositivo funzioni correttamente e in modo sicuro� > Lo stato di operatività è indicato dall'accensione del LED verde� > Impostazione commutazione impulso buio: l'uscita è collegata / il LED giallo si accende quando non risulta rilevato nessun oggetto�...
  • Seite 56 All manuals and user guides at all-guides.com...
  • Seite 57 All manuals and user guides at all-guides.com...
  • Seite 58 All manuals and user guides at all-guides.com...
  • Seite 59 All manuals and user guides at all-guides.com...
  • Seite 60 All manuals and user guides at all-guides.com Technische Daten und weitere Informationen unter: Données techniques et informations supplémentaires sur notre site web à: Technical data and further information at: Dati tecnici e altre informazioni si trovano su : www.autosen.com...