Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
TABLE OF CONTENTS
ATTENTION
Before using your compressor, first read this manual thoroughly, so that
accidents can be prevented.
1. PREFATORY NOTES
Buying your AIRPRESS compressor installation, you have become the owner of a
compressor installation with a high performance and reliability level. Correct use
and regular maintenance will increase the life of the compressor.
In this manual you will find operation and maintenance instructions. Read it
carefully and keep it as a guide to your compressor.
The compressor has been built to supply compressed air. In particular the
appliance cannot be used to produce air to be breathed by humans or used on
direct contact with foodstuffs. The appliance must be used only for the purpose for
which it was specifically designed. All other uses are to be considered incorrect
and therefore unreasonable. The manufacturer cannot be held responsible for any
damage resulting from improper, incorrect or unreasonable use. This machine is
not suitable for external installation.
2. DESCRIPTION
The pump connected to the motor through transmission belt delivers air in the
external air receiver through the outlet pipe, the aftercooler and the non return
valve. Once the set pressure of 12,5 bar is reached, the pressure switch will
stop and at the same time discharges the air which is in the pump and outlet
pipe, through the solenoid valve which is fed in parallel to the motor. In such a
way the automatic restart can occur without excess load when the pressure in
the air receiver is below 10 bar. The safety valve set to 13,5 bar connected to
the air receiver will act in case of failure of the pressure switch and guarantees
the safety of the machine.
page 13
page 13
page 14
page 14
page 15
page 16
page 16
page 17
13
Werbung
Kapitel
Inhaltsverzeichnis
