Medtronic GUARDIAN 4 Bedienungsanleitung Seite 19

4. After the green charger light turns off, disconnect the transmitter from the charger. The green
light on the transmitter starts to flash.
Pairing the transmitter
The transmitter must be paired to the system before a sensor can be used. Always refer to the MiniMed
780G System User Guide for instructions on how to pair the transmitter to the system.
Inserting the sensor
Always refer to the Guardian 4 Sensor User Guide for instructions on how to insert the sensor.
Connecting the transmitter to the sensor
Before proceeding, have the MiniMed 780G System User Guide available.
To connect the transmitter to the sensor:
1. After the sensor is inserted, consult the Guardian 4 Sensor User Guide for details on how to apply
the required tape before connecting the transmitter.
2. Hold the rounded end of the inserted sensor to prevent it from moving during connection.
19