Overall View; Presentation Of The Different Buttons; Lights Settings; Installing The Appliance - WMF PERFECTION 800L Serie Bedienungsanleitung

5| OVERALL VIEW

5.1| PRESENTATION OF THE DIFFERENT BUTTONS

BUTTON DESCRIPTION / GENERAL FUNCTIONS
Switching the machine on and off. It is necessary to press the button to start the machine.
Home button. Allows you to return to the home menu.
The machine has a range of settings – check them out! They let you create a more personalized
experience.
Go to the various cleaning options for the machine. Carrying out proper maintenance will
optimize the life of your machine and preserve the authentic taste of your coffee.
Allows you to return to the previous screen.
Go to the next. For instance, when preparing a Cappuccino, switch from milk preparation to
espresso preparation after a certain time.
Browse upwards in the menu / increase the parameter selected. Browse downwards in the
menu / decrease the parameter selected.
You can prepare one or two cups with your appliance by pushing the
OK
Confirmation of selection.
START
Start the selection.
STOP
Stop the selection.
Profile buttons at the right ofthe screen.
Profile button on the top left of the screen.
Contextual button, function depends on screen (advanced setting for recipes, settings for profiles,
etc.).
A recipe with this symbol is prepared from ground coffee inserted via the pre ground coffee
funnel .
3
button.
+
36

5.2| LIGHTS SETTINGS

Specific information about the buttons'
backlight
When a button is not illuminated, the corre-
•
sponding function is inaccessible.
When it is slightly illuminated, the function is
•
available and can be selected.
While the function requested is in progress,
•
the light becomes very bright.
Specific information about the light effects
on the base of appliance
When the machine is ON, the base shines
•
brightly. You can switch the light on or off, as
described in section 10.
When the machine is OFF the base does not
•
shine.
When the light is in floating mode, a drink is
•
being prepared.
When the light in the base is blinking, con-
•
sumer intervention is required to finish the
action in progress.
All generic information like warning informa-
•
tion arises on the display panel .
18
NOTE
This Product contains a light source of
energy efficiency class D. Please note
that the light element in the product is not
intended for lighting purposes. The light is
interchangeable by authorized service staff.
Specific information about the spout light of
appliance
The spout light is automatically activated
•
when a recipe is in progress.

6| INSTALLING THE APPLIANCE

Refer to first use figure A1 – A15 earlier in the
instruction.
WARNING
Connect the appliance to an earthed
230 V mains socket. Failure to do so
means that you run the risk of fatal injury due
to electricity! Respect the safety guidelines as
indicated as described in section 10.
Place your machine on a stable, flat, heat-re-
sistant surface away from water splashes and
sources of heat. Insure that the location chosen
is sufficiently well ventilated, as the appliance
gives off heat. Please do not place the appliance
on surfaces such as marble. Remove the protec-
tive film from the display panel .
18
Specific information about the drip tray
It allows you to collect water or coffee that
might flow out of the appliance during and
after preparation. It is important to always leave
it in place and to empty it regularly.
Switching on the aplliance
Switch on the appliance by pressing the
ON / OFF button , WMF-logo appears on the
26
screen. Follow the instructions provided by your
appliance (figure A1 – A15).
Initial settings
When using the machine for the first time, you
will be prompted to configure various settings.
Follow the indications displayed on the screen.
37