Zehnder Unitair Compo Anleitung Seite 33

8.2 MODE LS
V min?
Select minimum voltage value for LS link
00,0 V
Select each digit using
The following text appears on the screen:
V max?
Select maximum voltage value for LS link
10,0 V
Select each digit using
The following text appears on the screen:
/h – – – Vmin
m 3 Select airflow corresponding to Vmin
xxxx
Select each digit using
The following text appears on the screen:
–
/h – –
Select airflow corresponding to Vmax
m Vmax
3
xxxx
Select each digit using
The following text appears on the screen:
% ON
Select multiplier of LS link (on airflow) when terminals +12V and K3 are closed ('night' setup).
K3? 100%
Select each digit using
The following text appears on the screen:
PRESSURE
Pressure alarm is optional. Of you do not wish to set a pressure alarm select N(o), otherwise select Y(es) using
ALARM? N
ENTER to confirm.
If you selected N(o), the following text appears on the screen:
END SETUP
If you selected Y, the following text appears on the screen:
Pressure alarm setup:
∆P FAN
Choice of allowed pressure increment (?Pa admitted on filter) at reference airflow
xxx Pa
Select value using ?? keys, press ENTER to confirm (digit by digit selection).
Pressure alarm setup:
INIT Pa
Definition of reference pressure at reference airflow (optional if previously carried out)
REF? N
Selectionner Y(es) / N(o) using ?? keys then press ENTER to confirm.
If you selected N(o), the following text appears on the screen:
END SETUP
If you chose Y(es), the following text appears on the screen:
Pressure alarm setup :
m /h INIT
3
Enter airflow to define reference pressure.
0000
Select each digit using ?? keys and press ENTER to confirm (digit by digit selection).
Following texts appear alternatively on the screen and LED Alarm blinks:
Pa REF
Reference pressure initialisation busy....
INIT
xxxxm
3 /h
Display of actual pressure and airflow...
xxxx Pa
The setup is then completed.
END SETUP
, keys and press ENTER to confirm (digit by digit selection).
, keys and press ENTER to confirm (digit by digit selection).
, keys and press ENTER to confirm (digit by digit selection).
, keys and press ENTER to confirm (digit by digit selection).
, keys and press ENTER to confirm (digit by digit selection).
The setup is then completed.
The setup is then completed.
33
, keys and press