Zipro Neon Bedienungsanleitung Seite 23

EN
Slide the nut of the upper
resistance adjustment cable
(17) into the slot in the bracket
of the lower resistance
adjustment cable (19), pull
and tighten the upper cable
(17) and move the lower cable
bracket (19) vertically. Cable
nut should be on the bracket
as shown in the picture.
Fix the front column (2) to the main frame (1) with Allen bolts (16) and washers (52) (56).
3. Install arms and pedals
3a. Fix the left handle arm (6L) to the handlebar column (2) with hexagonal bolts (24), spring
washers (52), washers (64), flat washers (25)(64), handle arm sleeve axle (26) and the long axle
(27). Do not tighten all the elements yet.
23
17
18
20 19