EN
ASSEMBLY MANUAL
CAUTION! Follow the steps below during the assembly and use tools supplied with
the product.
Prepare sufficient space for the assembly operation. It is advisable to assemble the product with
another person because of the weight of some elements.
1. Install the front and rear
base
Fix the rear (4) and front base (3)
to the main frame (1) using bolts
(12), spring washers (66), curved
washers (13), and nuts M8 (14).
ATTENTION! Remove any plastic
or cardboard safety inserts
before assembly.
2. Install the cables and front column
Connect the connecting cable (18)
to the computer cable (20).
Next, connect the resistance adjustment
cable (19) to the other connecting cable
(18) as shown in the picture.
22