Care And Service; Troubleshooting Guide - Kärcher Puzzi 8/1 C Bedienungsanleitung

Upholstery cleaning
1. Use less detergent for sensitive fabrics and spray
the surface at a distance of approx. 200 mm. Then
only vacuum.
Cleaning tips
● Spray heavily soiled areas in advance and allow the
cleaning solution to work for 5 to 10 minutes.
● Always work from light to shadow (from window to
door).
● Always work from the cleaned to the uncleaned ar-
ea.
● The more sensitive the covering (oriental bridges,
Berber, upholstery fabric) the lower the concentra-
tion of detergent.
● Carpets with jute backs can shrink and bleed in col-
our if the work is too wet.
● Brush wet pile carpets in the direction of the pile af-
ter cleaning when wet (e.g. with a fibre brush or
scrubber).
● Impregnating after wet cleaning prevents the textile
from being quickly soiled again.
● To avoid pressure points or rust stains, do not walk
on or furnish the cleaned area until after it has fully
dried.
● To improve the cleaning result, rinse the object with
clean water after using detergents.
Detergent
Description Name
CarpetPro clean- RM 760
er (0.8 kg) powder
CarpetPro clean- RM 760
er, iCapsol (16 tabs
piece)
CarpetPro clean- RM 767 liq-
er, quick-drying uid
(10 litre)
CarpetPro clean- RM 764 liq-
er (10 litres) uid
CarpetPro im- RM 762 liq-
pregnation (5 li- uid
tres)
Defoaming (2.5 li- RM 761 liq-
tres) uid
For further information, please request the product in-
formation sheet and the EU safety data sheet for the rel-
evant cleaning agent.
Transport
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during transporta-
tion.
1. Place the spray/suction hose in the hook.
Illustration D
2. When transporting the device in vehicles, secure it
to prevent it from slipping or overturning in accord-
ance with the respective valid guidelines.
Metering Order num-
ber
1 % 6.295-175.0
2 tabs for 8 6.295-850.0
litres
1.2 % 6.295-198.0
1 % 6.295-854.0
20 % 6.295-852.0
0.5 % 6.291-389.0
English
Storage
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device during storage.
The device may only be operated indoors.

Care and service

DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
Clean the fluff filter
1. Remove the cover.
2. Remove the wastewater container from the device.
3. Clean the fluff filter regularly with a brush.
Clean the fresh water filter
1. Unscrew the fresh water filter.
2. Clean the fresh water filter under running water.
Clean the nozzle
1. Unscrew the union nut.
2. Clean the nozzle mouthpiece.

Troubleshooting guide

DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the mains plug.
The device is not working
1. Check the socket and the power supply fuse.
2. Check the mains cable and the mains plug of the de-
vice.
3. Switch on the device.
No water emitted from the nozzle
1. Fill up the fresh water tank.
2. Check the couplings on the spray hose for correct
seating.
3. Clean or replace the nozzle mouthpiece.
4. Clean the fresh water filter.
5. Spray pump defective, contact customer service.
Single-sided spray jet
1. Clean the nozzle mouthpiece.
Poor suction performance
1. Check that the cover is seated correctly.
2. Clean the seal on the cover and the contact surface
on the device.
3. Clean the fluff filter.
4. Check the suction hose for clogging; clean if neces-
sary.
Spray pump is loud
1. Refill the fresh water tank.
Heavy foaming in the wastewater container
1. Add defoaming agent (special accessory) to the
wastewater container.
Customer Service department
If the malfunction cannot be corrected, the device must
be checked by the Customer Service department.
11