Making Calls; Handsfree Facility; Dialling Stored Numbers From The Phone Book; Call Duration Display - AUDIOLINE DECT3300 Bedienungsanleitung

4.3

Making calls

1. Enter the required telephone number with a maximum of 20 digits using the number
pad. As the display is only capable of showing 12 digits, in the case of longer phone
numbers only the last 12 digits are displayed.
Note: If you have entered a number incorrectly, you can delete the number by repeatedly
pressing the button. The number is completely deleted by pressing the
time.
2. Press the call button
Note: You can also get a dialling tone by first pressing the call button
digits of your required phone number, your telephone will dial the number directly. With this
method of making a call, it is not possible to correct individual digits in the number in the
manner described above.
4.4

Handsfree facility

Press the call button
over the loudspeaker in the handset.
Press the call button
4.5

Dialling stored numbers from the phone book

After you have stored a few phone numbers, you can call these up very quickly and easily.
1. Press the phone book button
alphabetical order.
2. You can now select all of the stored numbers with the
choose a phone number directly alphabetically, press the appropriate letter. Pressing
will show the number of the record.
3. Now press the call button
automatically dialled.
4.6

Call duration display

The call duration in minutes and seconds is shown in the display during a call. Ten seconds
after dialling, the display will switch from showing the number dialled to showing the duration
of the call. The call duration will still be retained in the display for a few seconds after the call
has been ended.
- Operation -
and the required connection will be made.
during a call. You will now hear the person you are speaking to
again to switch off the handsfree facility.
. The display will now show the first number stored in
and the telephone number displayed will be
button for a long
. On entering the
and buttons. To
39