Antenna Installation - Modster Hobby Arrows 1100mm sky trainer Handbuch

Model assembly
2.Using the included Y harnesses, connected the two
aileron servos and the two flap servos. Insert the wiring into
the fuselage pass through, then insert the wing on to the
fuselage and secure with the included screws.
3.Connect the wing struts to the eyelets located on the
wings, then secure using included R clips.

Antenna installation

1.Install the antenna to the fuselage slot and secure it
with foam safe CA.
06
Required Adhesives:
Medium CA
HKM3.0*16