Teac PD-H570 Bedienungsanleitung Seite 6

Front Panel Controls and Their Functions
1 2 3
1power standby/on button
2power standby indicator
This indicator lights up in the power
standby mode; goes out when this unit is
turned on.
3remote sensor
This sensor is used when this unit is
operated alone by the optional remote
control transmitter. The sensor operates
only when the REMOTE CONTROL
SELECTOR switch on the rear panel is set
to the SINGLE position.
Display
8 1 2
w q 0
1 Play indicator
2 Pause indicator
3 Track number indicator
4 Index number indicator
5 Time mode indicator
4
8
4Disc tray
Load a disc on this tray with its label side
up while the tray is open.
When playing an 8 cm (3-inch) CD single
disc, make sure that the disc is set at the
center of the tray.
* 8 cm discs can only be played in Tray
No. 1.
5open/close (∫) button
Press this button to open the disc tray.
Press it again to close the tray.
3
4 5
9
6 Time counter/Program number
indicator
This shows the time information
corresponding to the time mode indicator,
in minutes and seconds. During the
program mode, a program number is
indicated here.
5 6 7
9 0 q
6 7
8
_ 6 _
6disc skip button
Use this to select a disc. When you press
the button, each number will be selected in
order.
7Music skip (Ú/Æ) buttons
These buttons are used for selecting the
desired track on the disc.
Æ : Press to skip forward.
Ú : Press to skip backward.
• You can skip to the beginning of the track
being played by pressing the button
once. If you hold the button pressed, you
can skip to the previous tracks in
sequence.
8Display
This display shows the current operating
states of this unit.
9stop button
Press this button to stop playing.
0Play (∏) button
Press this button to start playing.
qPause (ƒ) button
Press this button to pause playing. To
restart playing, press it again or the play
(∏) button.
7 REPEAT play indicator
ONE : This lights up when the repeat play
of a single track is engaged.
ö : This lights up when the repeat play
of one disc is engaged.
A-B : This lights up when the A-B section
repeat play is engaged.
TTL : This lights up when the repeat play
of all discs is engaged.
8 Over mark
This indicator lights up when the total
number of tracks on the disc is 16 or more.
9 Track calendar display
0 PROGRAM indicator
q SHUFFLE play indicator
w Disc NO. indicator
This indicates whether a disc is in a disc
tray or not.
ex.) means there is a disc in Tray No.1
means Tray No.1 is selected.