What To Do If - Electrolux ESL 67070 Benutzerinformation

64 electrolux
8. Put the filter (A) into position in filter (B).
Turn the filter (A) clockwise until it locks.

WHAT TO DO IF...

The appliance does not start or stops dur-
ing operation.
Malfunction Fault
code
The appliance The display
does not fill with
shows
water.
The appliance The display
does not drain
shows
the water.
The anti-flood The display
device operates.
shows
The programme
does not start.
All manuals and user guides at all-guides.com
To clean the spray arms
Do not remove the spray arms.
If the holes in the spray arms become clog-
C
ged, remove remaining parts of soil with a
thin pointed object.
To clean the external surfaces
Clean the external surfaces of the appliance
and control panel with a moist soft cloth.
Only use neutral detergents.
Do not use abrasive products, abrasive
cleaning pads or solvents (acetone).
First try to find a solution to the problem (re-
fer to the chart). If not, contact the service
centre.
Possible cause
The water tap is blocked or is
furred with limescale.
The water pressure is too low.
The water tap is closed.
The filter in the water inlet hose
is blocked.
The connection of the water in-
let hose is not correct.
The water inlet hose is dam-
aged.
There is a blockage in the sink
spigot.
The connection of the water
drain hose is not correct.
The water drain hose is dam-
aged.
The appliance door is open.
The mains plug is not connec-
ted in.
Blow out fuse in the household
fuse box.
Possible solution
Clean the water tap.
Contact your local water author-
ity.
Open the water tap.
Clean the filter.
Make sure that the connection
is correct.
Make sure that the water inlet
hose has no damages.
Clean the sink spigot.
Make sure that the connection
is correct.
Make sure that the water drain
hose has no damages.
Close the water tap and contact
the service centre.
Close the door correctly.
Put in the mains plug.
Replace the fuse.