Delay Start Button; Programme Buttons; Multitab Button; Cancel Button - Electrolux ESL 67070 Benutzerinformation

56 electrolux
1 On/off button
2 Display
3

Delay start button

4 Programme selection buttons
5 Energy saver button
6

Multitab button

7

Cancel button

8 Indicator lights
9 Function buttons
1) It comes on when it is necessary to fill the salt container. Refer to 'Use of dish-
Salt
washer salt'.
After you fill the container, the salt indicator light can stay on for some hours.
This does not have an unwanted effect on the operation of the appliance.
1) It comes on when it is necessary to fill the rinse aid container. Refer to 'Use of
Rinse aid
detergent and rinse aid'.
End-of-pro- It comes on when the washing programme is completed.
gramme
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing
programme operates.
Display
The display shows:
• The electronic adjustment of the level of
the water softener
• Activation/deactivation of the rinse aid
dispenser (only with multitab function on)
• The number of the washing programme
• Remaining time to the end of the washing
programme
• The end of a washing programme (the
display shows a zero)
• Remaining time to the end of the delay
start
• Fault codes
• Activation/deactivation of the audible sig-
nals.
Delay start button
Use this button to delay the start of the
washing programme with an interval be-
tween 1 and 24 hours. Refer to 'Select and
start a washing programme'.

Programme buttons

Press one of these buttons again and again
to set a washing programme. Each time
you press a button, the display shows a
number that is related to a washing pro-
gramme. Refer to 'Washing programmes'.
All manuals and user guides at all-guides.com
Indicator lights
Energy saver button
This function decreases the temperature in
the drying phase. The power consumption
decreases by 25%.
The dishes can be wet at the end of the
programme when you open the appliance
door. We recommend that you keep the
door ajar and let the dishes dry.
Press this button to activate the function.
The related indicator comes on.
Multitab button
Press this button to activate or deactivate
the multitab function. Refer to 'Multitab
function'.
Cancel button
With this button you can cancel a washing
programme or a delay start. Refer to 'Select
and start a washing programme'.
Function buttons
Use the function buttons for these opera-
tions:
• To adjust electronically the level of the
• To deactivate/activate the rinse aid dis-
water softener. Refer to 'Setting the wa-
ter softener'.
penser when the multitab function is on.
Refer to 'What to do if...'.