On/Off Button; Delay Button; Programme Buttons; Function Buttons - Electrolux ESL 64085 Benutzerinformation

22 electrolux

On/off button

1
Display
2

Delay button

3

Programme buttons

4
Indicators
5

Function buttons

6
Salt indicator. It comes on when it is necessary to fill the salt container.
After you fill the container, the salt indicator can stay on for some hours. This
does not have an unwanted effect on the operation of the appliance.
Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dispens-
er.
Multitab indicator. It comes on when you activate the function.
1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on while a
washing programme operates.
ON/OFF BUTTON
Press this button to activate or deactivate
the appliance.
After ten minutes from the end of the wash-
ing programme, the Auto Off function auto-
matically deactivates the appliance. This
helps to decrease energy consumption.
DISPLAY
The display shows:
• The electronic adjustment of the level of
the water softener
• The activation and deactivation of the
rinse aid dispenser (only with the multitab
function on)
• The time of the washing programme
• The remaining time to the end of the
washing programme
• The end of a washing programme (the
display shows a zero)
• The time of the delay start
• The alarm codes
• The activation and deactivation of the
acoustic signals.
1 2
1)
4
3
C
A B D
6
Indicators
DELAY BUTTON
Press this button again and again to delay
the start of the washing programme from 1
to 24 hours.
PROGRAMME BUTTONS
Press one of these buttons to set a wash-
ing programme. The related indicator
comes on. Refer to 'Washing programmes'.
FUNCTION BUTTONS
With these buttons you can:
• Adjust electronically the level of the water
softener. Refer to 'Setting the water soft-
ener'.
• Activate and deactivate the multitab func-
tion. Refer to 'Multitab function'.
• Activate and deactivate the rinse aid dis-
penser (only with the multitab function
on). Refer to 'What to do if...'.
• Cancel a washing programme in opera-
tion. Refer to 'Setting and starting a
washing programme'.
• Activate and deactivate the acoustic sig-
nals. Refer to 'Acoustic signals'.
5
E
1)