Product Description; Preparation For Use; Function Description - Concept NO8000 Bedienungsanleitung

EN

PRODUCT DESCRIPTION

1 Heated ironing plate
2 Function selection indicator
3 Function switch button
4 Water tank cover cap
5 Water indicator
6 Cable outlet
7 Water measuring cup
8 Brush attachment
9 Holder

FUNCTION DESCRIPTION

Use the function selection button to select the desired mode:
1. Ironing mode – ironing indicator is on
2. Steaming mode – steaming indicator is on
Steaming mode
Ironing mode
Push
Off
46
1
2
3
4
5
6
7
9
8
Steaming
indicator
Ironing
indicator

PREPARATION FOR USE

1. Hold the appliance in a vertical position and open the water tank cover
cap.
2. Fill the measuring cup with water up to the MAX line and pour it into
the water tank.
3. Close the cover cap.
Important notice:
• To ensure maximum lifetime of the appliance, we strongly recommend using
water!
If you live in an area with hard water, limescale will clog the appliance and reduce its efficiency.
• Use only cold water (never hot)!
• Never use the appliance without properly filled water tank! It may lead to irreversible damage to the appliance.
INSTRUCTIONS FOR USE
Important information: Never steam an item of clothing that someone
is wearing!
1. Plug in the appliance.
2. Turn on the appliance – ironing mode.
3. Wait approximately 40 seconds (Fig. 1). Once the indicator stays on, the
device is ready for use.
4. For steaming mode, switch the button to the steaming mode (the
steaming indicator is on).
5. The device is ready for use after approximately 10 seconds (Fig. 2).
ACCESSORY AND ITS USE
Important safety information: Always attach and remove the attachments
to the appliance that is switched OFF and cool!
The brush attachment opens the fabric fibres to ensure better steam
penetration and results. It helps to remove animal hair and lints.
AFTER USE
1. Switch off the appliance by switching the main switch to the OFF position.
2. Disconnect the appliance from the mains.
3. Let the appliance cool down for at least 30 minutes.
4. Open the water tank cover cap and empty the water tank.
5. Rinse the water tank with fresh water and let it dry.
NO8000 NO8000
EN
Open
only distilled or demineralized
40s
Ironing
mode
Push
Fig. 1
10s
Steaming
mode
Push
Fig. 2
47