Copying Fi Les From A Usb Device To The Idl7000 - Rt IDL7000m SCI Bedienungsanleitung

9.5. Copying files from a USB device to the IDL7000
1. Enter the library by pressing the "Library" button on the remote control.
If there is an external USB storage device connected, the list of available
storage devices will be displayed.
2. From the available storage devices list, select the appropriate USB
device – in this case "USB Device 0". At this stage, you can navigate within
the folder where the fi les to be transferred are located.
3. Select the "Archive/Move" function by pressing the "menu" key to switch
to fi le selection mode:
4. Select the fi le(s) to be transferred. You can use the "Mark block begin"
and "Mark block end" functions (green remote button) and/or "Mark single"
(blue remote button) to select the fi les.
38