Adding And Deleting Events In The Personal Planner - Rt IDL7000m SCI Bedienungsanleitung

4.4.1. Using the Personal planner
You can enter the Personal planner by pressing the "Menu" key (4) +
select "Personal planner" or by pressing the "Personal planner" key
(30) on your remote control.
Picture 37 shows the Personal planner interface. In a table, you can
see the names of the channel and programme as well as starting
date, time and recording mode. From here, you are able to delete or
add events to the Personal planner list. In the upper right corner, free
hard disk space is displayed.
Note:
The Personal Planner is only available if the real time clock is set.
In the fi rst column of the Personal planner, you can see the status of
events. There are two states:
Event is in progress (Red colour is for recording and green for other type)
There is a problem with the event
In a last column of the Personal planner, you can see the mode. The combinations available are in the table below:
Single tune (it will be deleted after processing)
Single record (it will be deleted after processing)
Weekly
Daily
From Monday to Friday
Series timer, all EPG entries with the same title will be recorded on this channel.
Reminder, two minutes before start a pop-up message appears, allowing you to "execute" or "abort"
Notify
Note: Signs for "Daily", "Weekly", "Monday to Friday" and "Series" can be in red colour for recording or green colour for tuning.

4.4.2. Adding and deleting events in the Personal Planner

Note:
For programmes that have parental lock, it is not possible to set an event without the pin code.
Deleting an event: To delete an event from the Personal Planner, you can use the "Up" and "Down" navigation keys to select the
event and then press the "Red" function key (8). After the pop-up message appears, confi rm the event by pressing the "Green"
function key (9) or cancel by pressing the "Red" function key (8) or "Exit" key (22).
Adding an event: To add an event to the Personal Planner, press the "Blue" function key (24) for "New Entry". After the New Planner
Event menu appears, use the "Up" and "Down" navigation keys to set the details for the event and press the "OK" key (6) to confi rm
the selection.
Note:
Events added in this way are set to a specifi c time and are not bound to the programme, as they are when added via the EPG.
Type: You can choose between four recording preferences. Record: the programme is directly programmed for recording. Tune: at
the beginning of the programme the receiver switches to the respective channel, a pop up appears asking you to start or delete the
Picture 37
29