Antenna Settings; Channel Search - Rt IDL7000m SCI Bedienungsanleitung

Note: Some transponders may transmit an incorrect time stamp.
4.1.4.2. Date
This option is able only if "Automatic Time Update" is set to "Off" and it is used to set current date. After pressing "OK", use the
directional keys "Left" and "Right" to select the day, month or year. To set desired value use the directional keys "Up" and "Down".
Confi rm your entries with the "OK" key (6).
4.1.4.3. Local Time
This option is able only if "Automatic Time Update" is set to "Off" and it
is used to set current local time. After pressing "OK", use the directional
keys "Left" and "Right" to select the hours, minutes or seconds. To set
desired value use the directional keys "Up" and "Down". Confi rm your
entries with the "OK" key (6).
4.1.4.4. Time Zone
The DVB standard broadcast time and date in the GMT time zone. In
order to display local time correctly, it may be necessary to set a time
zone, indicating the difference between local time and GMT (e.g. in
Germany daylight savings time in summer is + 2h, winter time is + 1h).
Press "OK" key (6) and select one of the time zones with navigation key
"Up" and "Down". At the end, press "OK" key (6) to confi rm selection.
4.1.4.5. Automatic saving Time
Picture 18
If daylight savings is enabled then the receiver is changing automatically the time on the following condition (valid for Europe with no
time limit).
- summer times begins and ends at 1:00 am universal time (Greenwich
mean time)
- it begins the last Sunday in March
- it ends the last Sunday in October.
This is done in disregard of DVB broadcasted information.

4.1.5. Antenna Settings

This is a place where you can set a type of antenna connected to your
digital receiver. On the picture 18, you can see the antenna settings
menu.
(to fi nd out more about antenna settings check chapter 1.4)
4.1.5.1 LNB supply protection
Picture 18a
Receiver is equipped with shortcut protection on the LNB supply. In case of a shortcut on antenna cable, a pop-up message, with
information about shortcut, will appear (see picture 18a). In that case,
disconnect antenna cable and try to locate and remove a shortcut. At the
end, press "OK" key (6).

4.1.6. Channel Search

This is a place where you can do complete satellite search or
transponder search (see picture 19).
4.1.6.1. Satellite Search
In this option there are 3 options that user has to set before start satellite
search (see picture 20):
Picture 19
18