Default Settings; Factory Defaults - Rt IDL7000m SCI Bedienungsanleitung

Audio PID
Use this option to manually set the Audio PID.
PCR
Use this option to manually set the PCR
Finding and storing the channels in manual and auto tune mode is similar, with the exception of the main and favourite lists. In manual
mode, only new channels are added to main TV and radio lists and no other changes are made to the lists.

4.1.7. Default settings

The default settings function is provided to return the receiver to all the
default settings programmed at the factory during production. This may be
necessary when a large number of settings have accidentally been made
incorrectly, for example. As you can see in a picture 23, there are two
kinds of default settings: "Factory defaults" and "Settings only".

4.1.7.1. Factory Defaults

Press the "OK" key (6) and confi rm with the "Green" function key (9) if you
want to change the unit to the "Factory default" settings.
Note:
Using this option will delete all data stored in the personal planner, channel
lists, and favourite lists.
Picture 23
During this process, you will also be given the option to format the hard
disk. It is helpful to do this occasionally to maximize the performance of
the hard disk. However, all data on the disk will be deleted. During this
step, you will be asked to enter a PIN code, to help prevent accidental
deletion of the content on the hard disk. The default PIN code is "1111."
If you do not want to delete the data on the disk, press "Exit." After this, a
"Quick Start Guide" menu will be open (see picture 24).
In the Quick Start Guide, you should select the correct menu language
and country, to make sure the unit will operate correctly in your current
location. You can also set the Time and Date, or leave the unit in Automatic
mode, to collect the correct Time and Date automatically. After making the
necessary changes, press the "Exit" key (22) to proceed to the next step.
Next step is to set the user preferences (see chapter User preferences for
Picture 24
more detail). After making the necessary changes, press the "Exit" key (22)
to proceed to the next step, antenna setting (see Antenna Settings). After antenna setting an "Automatic channel search" will start. This
part is the same as during the "Auto tune" option (see chapter Finding and storing the channels).
At the end user can set audio and video option (see chapter Audio/Video Settings).See also chapter 1.2
4.1.7.2. Settings only
Press the "OK" key (6) and confi rm with the "Green" function key (9) to if you want to reset the Settings only. Using this option, only
the on user preferences and settings, such as time and date, will be reset. The Library and all channel lists will remain the same.
Note:
If the menu is not displayed clearly or in black and white, after changing the settings, it is because the Video output mode was
changed when you reset the unit to default settings. To correct this problem see chapter Audio/Video Settings.
4.1.7.3 Preprogrammed Channel Lists
Use this option in case that you want to pre-programme the main TV and radio lists. Press "OK" key (6) and select one of the
countries with navigation key "Up" and "Down". At the end, press "OK" key (6) to confi rm selection. Your main lists as well as
favourites lists will be deleted. A new main lists will be created using information from the receiver memory.
20