Clearing The Assignment Of Button Inputs To Actuator Channels - eQ-3 Homematic HMW-IO-12-Sw7-DR Installations- Und Bedienungsanleitung

Depending on the actuator, button inputs are taught
differently:
Actuator
Switch actuator,
Dimming actuator
Blind actuator
If a button that was taught for an actuator is
taught for the same actuator again, the old
assignment is overwritten.
7.2 Clearing the assignment of button
inputs to actuator channels
Clearing the assignment of a button input and actuator
(channel)
• Press the programming button of the actuator
(channel) that you want to clear the assignment
for until the respective channel LED switches
36
Button behavior
Taught buttons behave like
toggle switches
Depending on whether teach
mode on the actuator was trig-
gered with the ▲- or ▼- button,
the button to be taught is taught
as "Open" or "Close", not as a
toggle button.