Clearing The Assignment Of Button Inputs To Actuator Channels - eQ-3 Homematic HMW-IO-4-FM Installations- Und Bedienungsanleitung

assignment is overwritten.
7.2 Clearing the assignment of button
Clearing the assignment of a button input and
actuator (channel)
• Press the programming button of the actuator
• Release the button. The module is now in
• Now, press a button on the button input of
• Test the setting by actuating a button on the
Downloaded from www.Manualslib.com
If a button that was taught for an actuator is
taught for the same actuator again, the old
inputs to actuator channels
(channel) that you want to clear the assignment
for until the respective channel LED switches
from slow flashing to quickly flashing (after
approx. 6 seconds).
delete mode.
a module for which you want to clear the
assignment. The channel LED on the actuator
goes dark and the assignment is deleted, the
actuator (channel) is no longer actuated on this
switch input.
deleted button input, the actuator (channel)
should not react.
manuals search engine
29