Disassembling The Rotor - Elmo Rietschle G-Serie Instandsetzungsanleitung

8 Disassembly
610.44495.40.320 · 09.2013
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
8.9

Disassembling the rotor

▪ Remove screws (003) with washer (004).
▪ Remove the intermediate flange (026).
▪ Remove the nuts (409) from the motor housing (001).
▪ For rotors with weights over 20 kg [44 lbs]: screw the threaded rod along with
ring nut (K) into the rotor hole (005).
▪ Attach the crane hook to the ring nut.
▪ NOTICE! Do not damage the windings (e.g.: by twisting or pushing).
▪ Pull the rotor (005) carefully out of the motor housing (001).
▪ Place the rotor (005) on the rotor support (G) and remove the crane hook.
▪ NOTICE! Screw a screw of the correct size into the threaded hole in the
rotor (005) to protect it from damage.
▪ Pull the roller bearing (008) off using the bearing puller (B).
34 / 64
Tel. 071 918 60 60, Mail: v-g@prematic.ch
© Gardner Denver Deutschland GmbH