Tools And Materials; Tools And Equipment - Elmo Rietschle G-Serie Instandsetzungsanleitung

© Gardner Denver Deutschland GmbH
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
5

Tools and materials

5.1

Tools and equipment

Improper use of tools can damage parts of the compressor!
1. When using tools, do not damage the compressor parts.
2. Replace the compressor parts that are damaged.
Tools and fixtures required for repair:
▪ Allen key/screw bits with screwdriver for removing and assembling screw
connections
▪ Allen tubular key/screw bits with screwdriver for removing and assembling
screw connections
▪ Measuring instrument for determining the impeller distance upon replacement
of the sleeve (134)
▪ Slotted screwdriver for disassembling parts
▪ Screwdriver/ratchet with socket wrench inserts for removing and assembling
screw connections
▪ Sidecutters/combination pliers for removing the feather keys
▪ Circlip pliers for removing and assembling circlips
▪ Rubber hammer for striking the inner rolling bearing ring
▪ Brush for applying grease to the sealing lip of the radial shaft seal ring.
▪ Assembly device (A) for mounting the end plate (450) on the motor side with
recess for rotor (005)
WARNING! Risk of injury from tipping over! Connect the assembly de-
vice tight with a stable foundation.
Tools and materials
NOTICE
21 / 64
Tel. 071 918 60 60, Mail: v-g@prematic.ch
5
09.2013 · 610.44495.40.320