Operation; Button Functions; Switching On, E-Field Measurement - elv EH 100 Bedienungsanleitung

All manuals and user guides at all-guides.com

5. Operation

5.1. Button functions

ON
OFF
Switching on and off
E
Changing between E and H field measure-
H
ment, measuring range change
Changing between normal measurement,
HOLD
peak value measurement (peak) and
PEAK
the hold function
Changing between linear measurement,
HI
LO
high and low pass
5.2. Operation

5.2.1. Switching on, E-field measurement

To switch on press the "ON/OFF" button briefly. A
segment test follows on the display, whereby all
segments appear for a short time.
The device is in the default state, i.e. in the E-field
measuring range 0 to 2 kV/m.
Hold the separate sensor near the suspected
source of interference and at the same time watch
the bar graph indicator on the display. This indi-
cates any field changes very quickly.
Move the sensor so that you can determine the
23