Making Broadcast Calls; Receiving Broadcast Calls - Motorola WAVE TLK 100i Bedienungsanleitung

English
If you switch to a different channel while receiving the call,
your radio stops receiving the Broadcast Call. You cannot
use any side button functions until the call ends.
To receive calls from or make calls to the group of users
using broadcast call, your radio must be configured to the
broadcast call talkgroup by your dealer.
6.3.1

Making Broadcast Calls

1 Press the programmed Talkgroup/Contact List
Scroll Rocker.
2 Press and hold the PTT button to make the call.
The display shows a countdown from 3, 2, and 1.
3 Wait for the Talk Permit Tone or PTT Side Tone
to end and speak clearly into the microphone if
enabled.
The green LED lights up. The display shows the call
alias.
34
NOTE:
The call ends when there is no voice activity
for a predetermined period. The radio returns
to the screen you were on before initiating the
call.
6.3.2

Receiving Broadcast Calls

When you receive a Broadcast Call:
• The green LED blinks.
• Your radio generates a receive broadcast alert tone
before the broadcast audio.
NOTE:
The Broadcast call has a higher priority compare
to Group Call and Private Call, but a lower priority
compare to Emergency Call.
Your radio is able to receive Broadcast Calls even
when "Do not Disturb" (DND) mode is enabled.