HEIDELBERG Suprasetter A52 Installationsanleitung Seite 72

Installation
Fig. 69 PCB 00.785.1151
Note: Use a dielectric pen!
Fig. 70 Reset button S3 and DIP switch S2
Fig. 71 DIP
1 S2-1
2 S2-2
3 S2-3
4 S2-4
Tab. DIP switch S2
70
5. Unscrew the two screws from above for the
6. Plug X158 of the service pushbutton (see
7. Fit bracket again.
8. Set switch 3 (Fig. 70/3) of microswitch S2
Function
Chiller
Program
Test mode
Buzzer
bracket (Fig. 68/3) to which the filler hose is
fastened.
position 9 in Table Filling/3) to X158 on the
chiller PCB (Fig. 69/1).
down to OFF.