HEIDELBERG Suprasetter A52 Installationsanleitung Seite 71

Fig. 67 Chiller
When preparing the coolant, make absolutely sure that the mixture is clean
because even small amounts of dirt can cause changes in the coolant and can
damage the components in the cooling circuit.
Caution - Risk of injury by inhalation, ingestion, eye or skin contact from
Glysantin
Wear chemical-resistant protective gloves as well as respiratory and eye protec-
tion when handling Glysantin.
Heed the handling notes given in the safety data sheets or the notes on the cool-
ant container.
Fig. 68 Filling
Suprasetter A52/A75 – Installation
1. Switch off the Suprasetter with the power
switch.
2. Unscrew three screws (Fig. 67/1) and open
the chiller unit.
NOTICE
CAUTION
The numbers correspond to the items in the Table
Filling above.
3. Fit funnel (Fig. 68/2) onto the filler hose (Fig.
68/3).
4. Prepare coolant made up of 1 part Glysantin :
3 parts chlorine-free drinking water, 25% in
the measuring cup (Fig. 68/1).
Initial filling: ca. 1 liter
Top-up filling: ca. 0.2 liters
Installation
69