HEIDELBERG Suprasetter A52 Installationsanleitung Seite 56

Installation
Fig. 44 Laser module with spring
Sensitive lens
Do not touch the lens!
Fig. 45 Eccentric
Risk of breakage
Do not use force; the pin could break!
54
Unplug connector X381 (in front of the module
slot) to gain more space.
Check that the PCB is not damaged. Remove the
protective foil from the lens. Clean the module slot
with a lint-free cloth if necessary.
Make sure that the spring (Fig. 44/1) enters the
hole (Fig. 44/2) when you are inserting the laser
module.
NOTICE
Take the eccentric (Fig. 45/1) from the package, fit
it onto special-purpose tool BV.011.9860/01 and
screw tight.
NOTICE