HEIDELBERG Suprasetter A52 Installationsanleitung Seite 51

Fig. 34 Motor shaft viewed from inside
Fig. 35 Covering
Fig. 36 X69
Suprasetter A52/A75 – Installation
Fit the cover (Fig. 35/1) and the bezel (Fig. 35/2).
Route adapter X22 / X69 to the electronics box.
Start at the swivel area of the rotary table/the opto
switch lug and secure with cable ties.
The cable between connector X69 (Fig. 36/1) and
cable tie (Fig. 36/2) should be 220 mm long.
Plug connector X69 (Fig. 36/1) to motor M80.
Installation
49