Safety
Confirmation is always required, regardless of whether the DIAG or GUI application controls the
machine locally or remotely. An automatic timeout occurs after 10 minutes to prevent infinite remote
control sessions without pressing the confirmation key.
Fig. 28 CTP User Interface
26
The on-site monitor also indicates that the key-
operated switch has been turned and the safety
loop thus has been bypassed.
The yellow key (Fig. 28/1) in the bottom status bar
of the figure indicates that the service key was
turned, i.e. the key-operated switch is switched
on.
The text box (Fig. 28/2) displays the following text:
RECORDER INFO 5011: This service switch
bypasses the safety loop.