Respekta CH 21060 SBZ Bedienungs- & Installationsanleitung Seite 63

- Fix the bottom chimney mounting plate, (5.12) to the
wall with two 4x35mm countersunk screws
- Fix the base of the bottom chimney with two 4x8mm
countersunk screws on the sides of the hood.
- Secure the mounting bracket with two 4x8mm
countersunk screws.
- Lift the front of the hood, remove the grease filter
and secure the hood from the interior using two
4x35mm countersunk screws through the 2 holes in
the hood rear panel.
- Fit the charcoal filters at the sides of the motor.
en-28
Fig. 5.15
Fig. 5.16
Fig. 5.17