Extensions Of Patient Surface - wissner-bosserhoff sentida 7-i Gebrauchsanweisung

7.4 Extensions of patient surface

The low nursing bed sentida 7-i offers two methods to extend the patient surface. A perma-
nent extension of the patient surface, carried out at the manufacturer´s plant, or an optional
temporary extension.
Long-term (fixed) extension for the patient surface
The low nursing bed sentida 7-i can be delivered with a 10 cm or 20 cm extension for the pati-
ent surface. This patient surface extension can also be implemented afterwards in the factory
or by authorized qualified personnel. An additional extension can then be attached to the calf
rest. To close the resulting foot-end gap, a corresponding protector needs to be inserted. If you
want to have the patient surface of your low nursing bed sentida 7-i extended, please contact
your service partner. You can find the address at the end of these instructions for use.
Temporary extension of the patient surface
If the bed is equipped accordingly, the patient surface of the bed can be extended and shor-
tened again by 10 cm, 20 cm or 30 cm at the foot end without tools. This is why the foot end
of the bed is retractable and can be locked at two levels. The foot end can be unlocked with
a yellow rope, which is attached between the side panels at the left and right lock of the foot
end. You can unlock the foot end by pulling the yellow rope slightly upwards. You need to insert
a protector to close the resulting foot-end gap in this case as well.
Yellow rope for releasing
the foot end
Can be folded down
Foot-end
99