Pressure Unit - KNF SC 920 G Betriebsanleitung

Operating vacuum pump system
Menus and buttons
1 Operating mode menu
2 Pressure units menu
4 Button for ventilation valve:
ON = To open
CLOSE = To close
5 Button for coolant valve
(accessory) at high-
performance condenser:
ON = To open
CLOSE = To close
6 Button for the process:
START = To start
STOP = To stop
7 Button for automatic
pressure reduction:
Press = Finish (the current
pressure is applied as the
setpoint pressure)
24 Translation of original Operating Instructions, English, KNF 334631-334633 07/21
Fig. 9: Menus and buttons on the touchscreen
Operation
Menu language
When the start page appears after switching the hand terminal on,
choose between the following languages: German, English, French,
Italian, Spanish, Dutch, Japanese, and Chinese. The selection can
be made only immediately after switching on.

Pressure unit

Process pressure can be displayed on the hand terminal in mbar,
bar, hPa, or Torr.
Use the Pressure units menu to select the pressure units (button
on touchscreen; see Fig. 10).
Pressure units can be changed only when no process is active.
In order to change the unit of pressure, it is necessary to
temporarily switch to another operating mode.
Fig. 10: Pressure units menu
Vacuum Pump System SC 920G