Cleaning The Filters - Electrolux 7000 service Bedienungsanleitung

16

Cleaning the filters

C
1. Turn the filter (A) counterclockwise and
remove it.
2. Disassemble the filter (A).
3. Remove the filter (B).
4. Wash the filters with water.
5. Before you put the filter (B) back, make
sue that there are no residues of food or
soil in or around the edge of the sump.
(C).
Make sure that the filter (B) is correctly
positioned under the 2 guides (C).
6. Assemble the filter (A) and put it into
position in filter (B). Turn it clockwise
until it locks.
A B C
CAUTION! An incorrect position
of the filters can cause bad
washing results and damage to
the appliance.
Cleaning the upper spray arm
We recommend to clean regularly the upper
spray arm to avoid soil to clog the holes.
Clogged holes can cause unsatisfactory
washing results.
1. Pull out the upper basket.
2. To disengage the spray arm from the
basket, press the spray arm upwards in
the direction indicated by the lower
arrow and simultaneously turn it
clockwise.
3. Wash the spray arm under running
water. Use a thin pointed tool, e.g.
toothpick, to remove particles of soil
from the holes.