Instructions for use
Before switching on the power tool
Unpack power tool and accessories
and check that no parts are missing
or damaged.
Attaching/changing the
sanding head
`^rqflk>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=ÉäÉÅíêáÅ=
éçïÉê=íççäI=éìää=çìí=íÜÉ=ã~áåë=éäìÖK
To attach:
Press the two locks on the tool change
head (1.).
Put the tool change head on the sanding
head (2.). Rotate sanding head until it
engages. The locks move back to their
original position.
20
All manuals and user guides at all-guides.com
To change:
Press the two locks on the tool change
head (1.) and remove sanding head (2.).
Attaching and changing
the sanding tools
`^rqflk>
_ÉÑçêÉ=éÉêÑçêãáåÖ=~åó=ïçêâ=çå=íÜÉ=ÉäÉÅíêáÅ=
éçïÉê=íççäI=éìää=çìí=íÜÉ=ã~áåë=éäìÖK
Lift up the lock on the FixTec clamping
nut (1.). Loosen clamping nut by turning
it anti-clockwise (2.).
Attach/change diamond sanding pad.
Tighten FixTec clamping nut and fold
down lock.
WST 1000 FV