Instructions For Use; Attach The Guard - Flex L 26-6 230 Originalbetriebsanleitung

L 26-6 230

Instructions for use

WARNING!
Before carrying out any work on the angle
grinder, always pull out the mains plug.
Before switching on the power tool
Unpack the angle grinder and check that
there are no missing or damaged parts.

Attach the guard

WARNING!
When using the angle grinder for roughing
or cutting, never work without the guard.
A special cutting guard must be used for
cutting.
Pull out the mains plug.

Connect the guard to the clamping flange

with the clamping ring by inserting the
cam on the clamping ring into the groove
on the flange (1.).
Rotate guard hood into the required

position (2.) and tighten clamping
lever (3.).
Remove in reverse order.

Attach the handle
NOTE
It is not permitted to operate the electric
power tool without the handle.
Attaching/changing the tool
Pull out the mains plug.

Attach the grinding wheel
Press and hold down the spindle

lock (1.).
Using the face spanner, loosen the

clamping nut on the spindle in an anti-
clockwise direction and remove (2.).
Insert the grinding wheel in the correct

position.
21