Setting Up The Grill - tepro MILWAUKEE Bedienungsanleitung

t
The thermal insulation of the ash colle-
ction tray handle has been additionally
improved.
This concerns part No. 20 in the scope
of delivery. In this respect, the following
parts have been extra added to the scope
of delivery:
Additional parts in the scope of delivery
Handle
M6x12 bolt
M6 nut
Danger Burning and accident
hazard!
Bear in mind that the handle of
the ash collection tray gets
very hot during grilling. Grasp
the ash collection tray handle
only in oven gloves. Let the grill
and the charcoal and ash in the
ash collection tray cool down
completely before emptying
the ash collection tray.
Affixing the handle to the ash
collection tray
1. Before you slide the ash collection
tray onto the guide rails of the sheet
metal holder, you need to mount the
wooden handle to the ash collection
tray (see Step 18 on Page 10 of the
Instruction Manual). The handle has
been extra added to the grill parts
delivered.
2. Loosen the two M6x12 bolts and two
M6 nuts that are already attached to
the ash collection tray.
30
P180143-TEPRO-1049-Milwaukee-Smoker_GB_20180720.indb 30
All manuals and user guides at all-guides.com
1
2
2
3. Position the handle on the ash
collection tray as shown in the figure
below. Fasten the handle using the
two M6x12 bolts and two M6 nuts
loosened before. Then slide the ash
collection tray onto the rails of the
sheet metal holder.

Setting Up the Grill

Warning Risk of damage!
The bolts can loosen slowly
during operation and affect the
grill stability.
– Check whether the bolts are tight pri-
or to each use. If necessary, tighten
all of the bolts again to ensure the grill
stands stable.
– When using the grill, please protect the
floor and surrounding walls from possi-
ble soiling e.g. through fat splashes.
• Place the grill on an even, sturdy sur-
face outdoors before use.
20/7/2018 3:59 PM