7. Fasten wheels (6) on the wheel axle
using two M12 nuts (B).
8. Place exhaust flap (9) over the bolt
neck on the upper end of smoke pipe
(7). Then place spring (8) on the bolt
neck and fasten with a cap nut.
Exhaust flap
9. Connect the exhaust pipe to the large
grill chamber using four M6 x 12mm
bolts and four M6 nuts.
P180143-TEPRO-1049-Milwaukee-Smoker_GB_20180720.indb 27
All manuals and user guides at all-guides.com
10. Place the grease collection bucket
11. Attach sheet metal holder (27) and
Cap nut
Spring
12. Mount handle (10) to the large grill
Handle
holder (23) through the hole on the
left side in the large grill chamber.
Grease collection
bucket holder
front rack (19) to the large grill cham-
ber using six M6 x 12mm bolts.
chamber using four M6 x 12mm bolts
and four M6 nuts.
t
27
20/7/2018 3:59 PM