Setting Up The Grill - tepro Kettle barbecue Tucson 1136 Bedienungsanleitung

9. Installing the cinder pot
Attach the cinder pot holder (15) to the
fire tray (10) using the screw (E) and
nut (F). Then insert the cinder pot (12).
10. Installing the BBQ and coal grates,
coal separators
Position the coal grate (9) inside the
fire tray (10) and the coal separators
(7) on the coal grate. Install the BBQ
grate (6) in the upper seating of the fire
tray (10).
P150167_TEPRO_1136_Tucson_GB_20150810.indd 25
11. Installing and closing the lid
Place the lid (4) on the fire tray (10).
The ball handle is pre-installed. You
can slightly lift the barbecue at the
fire tray handle (11) and then move
the barbecue to the desired location.
Hold the lid (4) while moving. Unins-
tall the barbecue in reverse order.
I
mportant: Tighten all screws.

Setting up the grill

Attention Risk of damage!
During use, the screws can
loosen slowly and impair the
grill's stability.
– Check that all screws are tightened be-
fore use. If necessary, tighten all screws
to guarantee stability.
• Before use, place the BBQ on an even,
sturdy surface outdoors.
k
25
10/8/15 9:15 AM