tepro MILWAUKEE Bedienungsanleitung Seite 26

t
2. Remove the lid from the large grill
chamber (1) by removing the hinge
bolts. Then pull the hinge pins out of
the hinges of the grill chamber.
3. Connect a long support leg (4) and a
wheel support leg (2) to the large grill
chamber using eight M6 x 12mm bolts
(C), eight M18 washers (D) and eight
M6 nuts (A).
4. Stick the hook of storage rack (3)
through the holes in the support legs
as shown.
26
P180143-TEPRO-1049-Milwaukee-Smoker_GB_20180720.indb 26
All manuals and user guides at all-guides.com
5. Connect the other two support legs
6. Stick wheel axle (5) through the holes
(2, 4) by sticking the hooks of the
storage rack through the holes in
the support legs. Fasten the parts
together using eight M6 x 12mm bolts
and eight M6 nuts. Make sure that the
wheel is on the side where you can
find the connection opening with the
small grill chamber.
Note:
Place the assembled grill upright with
the help of another person. While
doing so, make sure not to exert too
much pressure on the legs.
in the wheel support legs.
20/7/2018 3:59 PM