Endress+Hauser t-mass I 300-digital Einbauanleitung Seite 10

EA01290D
8.1 Installing a new sensor protective bracket
1 →
‣
Applying a slight amount of force, fit the new protective bracket over the
sensor.  This causes the two tabs on the sensor protective bracket to be
pushed apart.
3
‣
 Once the sensor protective bracket is rotated by 1/4 turn, the two tabs
click into place.
It should no longer be possible to turn the sensor protective bracket.
10
2 →
¼
‣
Rotate the sensor protective
bracket by 1/4 turn.
Endress+Hauser