Timer Functions; Time-Controlled Sequence Files; Alarm Function - EuroLite ESN 7x80 USB LAN Bedienungsanleitung

Timer functions

Time-controlled sequence files

It is possible to display one or more messages that have been saved automatically at specified times (e.g. for
promotions). For these sequence files, 10 additional memory locations are available, numbered in the special
format S0 to S9.
Note: For time-controlled messages, the LED display must be permanently powered. If the power supply is
interrupted, the internal clock becomes inaccurate and must be reset.
(3) Under
(4) Under

Alarm function

It is possible to automatically display the date and time as an alarm via the 'Send' > 'Alarm' menu.
' '
Start time enter the start
of the display period
' '
End time enter the end of
the display period
(1) The alarm is displayed 10 times
(2) The interval between each alarm is 1 minute
(3) Set the hourly alarm on
(4) Set the hourly alarm off
'
(1) Select ScheduleW
'
(2) Under File
(5) Select the desired messages
(6) Select the weekday
'
(7) Click on
LED display
32 • EN
'
'
, select the memory location (0-9).
'
SetW to transfer the settings to the