Running A Saved Message; Editing A Saved Message; Deleting Messages; Password Protection - EuroLite ESN 7x80 USB LAN Bedienungsanleitung

Running a saved message

Previously stored messages can be displayed via the
waits for the entry of the memory location (01 to 99). For the factory-set demo message with display examples,
select memory location 00.
Step Keys to press
1 RUN
2 01 ENTER

Editing a saved message

Follow these 5 steps to edit messages that are already stored in the memory. These messages are displayed with
OLDFIL
the addition [ ].
Step Keys to press
1 PROG
2 01 ENTER
3 Now change the text (and formatting if necessary)
4 RUN
5 Y

Deleting messages

To delete messages and deactivate the timer and alarm function, press
NEXT
to scroll through the different options and confirm your choice with
Option
DEL ALL
DEL MSG
DEL FILES??
DEL ON/OFF
DEL ALARM

Password protection

The default password '000' for the programming function is set at the factory. If necessary, you can change or reset
the password in programming mode or deactivate the password protection. The following table shows an example
of the steps for changing the password.
Step Keys to press
1 PROG
000 ENTER
2
01 ENTER
3
CPW
4
5 NEXT x 3
6 AAA ENTER
AAA ENTER
7
8 RUN
Description
Run a saved message
Select file 01
Description
Begins the edit program mode
Enter the file number of the message to be edited
Ends the edit program mode
Saves the message again
Description
Delete all messages
Delete current message
Delete specific file (01-99) or sequence file (S0-S9)
Deactivate the auto on/off timer function
Deactivate the alarm function
Description
Begins the edit program mode
Enter default password '000'
Enter file number
Enter password mode
Select an option and confirm with
(a) UNUSE PASS: Turn off password security
(b) USE PASS: Turn on password security
(c) RES PASS: Reset to default password '000'
Select option (d) CHANGE PASS to change the password
Change password to AAA
Confirm password AAA
Ends the edit program mode
RUN
key. A current playback is thereby stopped and the unit
CLR
ENTER
ENTER:
38 • EN
Display
RUN: ??
Message 1 is displayed
Display
OPEN: ??
OPEN: 01
OLDFIL [CYCLIC]
SAVE? (Y/N)
Message is displayed
in programming mode. Use
.
Display
PASSWORD:***
OPEN: ??
OPEN: 01
UNUSE PASS
CHANGE PASS
CHANGE: ***
AGAIN: ***
PREV and