Transmission via USB port
If the LED display is connected to the computer via the USB port, the following transmission parameters must be
set:
Transmission via network connection
If the LED display is connected via a network, the following transmission parameters must be set:
Saving, loading or creating new messages
As with other programs, it is possible to save created messages on the computer, load saved messages or create
a new message via the menu or the corresponding icon in the toolbar. When saving messages,
automatically appended as the file extension. A total of 99 memory locations are available for messages (file 01-
99), which can be stored in the memory of the LED display.
The keyboard combination
▪
As is usual with text editing programs, you can delete text passages with the
▪
(1) Select the COM port assigned by the operating system
( chapter
(2) Enter the default value
(3) Click on
display will show the new message.
(1) Enter the correct IP address and the correct
(2) port ( chapter
(3) Click on
display will show the new message.
'
'
'
'
CTRL
+
ENTER
also creates a new file.
'
'
Setup
).
'
'
128
.
'
'
Send
to start the transmission. The LED
'
Connecting to a Network
'
'
Send
to start the transmission. The LED
30 • EN
'
).
'
'
DEL
key.
'
'
.msg
is