ECM Manufacture Compact HX-2 PID Bedienungsanleitung Seite 33

Follow the steps as indicated below:
1.
Brew group at the beginning
4.
Remove the thin gasket of the
shower tray
7.
Clean the groove before inserting
the new group gasket
The steam nozzle is blocked
Clean the holes of the steam nozzle carefully with a needle or with a paper clip.
For this purpose, the steam nozzle may be unscrewed as well.
Afterwards replace the steam nozzle.
Translation of the original German user manual
2.
Remove the countersunk screw in
the middle of the brewing unit
5.
Now the group gasket can be
removed.
8.
Insert the new group gasket with
the rounded side facing upwards
3.
Remove the shower screen and the
shower plate
6.
Remove the group gasket with a
screwdriver
9.
Replace the gasket of the shower
tray (see point 4) and the shower
plate
ENGLISH
32