Creating A Playlist - JVC KD-NX10 Bedienungsanleitung

• You can play CD-Rs (recordable CDs)
and CD-RWs (rewritable CDs) on this
unit,
You can also use multisession CDs,
but a multisession CD must be final-
ized before it can be played.
Depending on the recording device
used to record the CD-R/CD-RW
and / or the CD-R/CD-RW itself,
it may not be possible to play some
CD-Rs/CD-RWs on this unit.
For further information about creating
MP3/WMA files and ID3 tags, please
consult your dealer or check on the In-
ternet.
Note:
Due to the abundance of different kinds
of CD burning software and their asso-
ciated settings we cannot guarantee the
playback quality of MP3/WMA CDs.

Creating a playlist

Due to the number of MP3 files that can
be saved on an MP3 CD, the MP3 CD
quickly becomes confusing. You can
make it less confusing using playlists.
In a playlist, you can combine, for exam-
ple, all the desired songs in a category
(e.g. rock).
This playlist can then be burned on the
CD together with the MP3 files that are
stored in folders.
The unit recognises this playlist (several
possible) on reading the MP3 CD and
can then play the MP3 tracks in the order
specified by the playlist.
In this case, the playlist mode must be
activated as described in "Switching be-
tween folder/playlist" on page 167.
MP3/WMA operation
We used the freeware WINAMP in our
trials for creating playlists. Other pro-
grams may also be used to create playl-
ists.
The playlist formats M3U and PLS are
supported by the unit.
Note:
Please not that M3U and PLS playlists
are only supported by the unit if these
have been created using relative speci-
fied paths.
For further information about creating
playlists, please check on the Internet.
165