General Operation; Switching On/Off; Setting The Volume; Activating The Tone Menu - JVC KD-NX10 Bedienungsanleitung

General operation

General Operation

Switching on/off

Press .
The unit can also be switched on/off via
the vehicle ignition.
To switch the unit on via the ignition, the
unit must have previously been turned
off via the ignition.
After switching off the ignition, the unit
can be prevented from switching off by
pressing the button within 3 sec-
onds.
Note:
The unit can also be switched on with
the ignition switched off via the
button, but it will switch off automati-
cally after 1 hour.
114

Setting the volume

Turn the left-hand rotary control
The volume increases or decreases.

Activating the tone menu

Press . The tone menu is activated.
The following functions can be called
up: Bas (Bass), Trb (Treble),
(Fader), Bal (Balance), Flt
adjustment), Sub (Subwoofer) and
(Loudness).
Settings for bass and treble, for the FM,
AM (MW, LW, SW) wavebands, for
road traffic announcements, navigation
announcements, telephone mode, CD,
MP3/WMA and CDC/AUX mode are
stored separately.

Setting the bass

Press the
.
multifunction button.
Fad
Set the desired bass level using the
(Linear
right-hand rotary control
Ldn

Setting the treble

Press the
multifunction button.
Set the desired treble level using the
right-hand rotary control
button and then the
.
button and then the
.