Points Of Interest (P.o.i.) Cd - JVC KD-NX10 Bedienungsanleitung

Selection NATIONWIDE
Using the right rotary control
select a category and press the con-
trol to confirm.
A list with special destinations is dis-
played or, if there are more than 9 en-
tries in the list, you will be prompted
to enter text.
Enter the point of interest and con-
firm.
Confirm the point of interest in the
displayed list by pressing the right
rotary control .
The system jumps to the route menu.
Note:
A list of possible points of interest is
displayed by pressing the right rotary
control for more than 2 seconds
without having selected any letters.

Points of interest (P.O.I.) CD

The following contains a general de-
scription of the points of interest (or
P.O.I.) CDs.
,
There are two methods for selecting a
point of interest from a points of interest
or P.O.I.-CD:
• During active navigation, a point of
interest can be selected in the vicinity
of the current position or near the en-
tered destination.
• If navigation is not active, points of in-
terest can be selected in the vicinity of
the current position.
Insert the desired points of interest CD
into the CD slot. After a short time, the
following display appears:
Press the right rotary control
Navigation operation
The valid categories for the current
points of interest CD are displayed.
The categories and points of interest
shown in the illustrations are examples.
The actual display is dependent upon the
CD used.
Select the desired category with the
right rotary control
right rotary control
category.
Note:
If the set user language is identical with
one of the languages available on the
CD, the categories are displayed in this
language. If there is no correspondence,
the categories are displayed in all avail-
able languages. This can be recognised
by the country abbreviations in front of
the category.
.
. Then, press the
to confirm the
141